• Remove the sand from the bunker
• Check that the bunker is correctly graded for adequate drainage
• Compact the surface with a roller or plate compactor.
• Measure the square metres to be treated.
• BunkerFix is supplied ready to use in 20 ltr containers (treats 10 sq mtrs)
• Spray 10 ltrs of BunkerFix onto 10 sq mtrs of the exposed surface and  allow this to soak in. Do not install if heavy rain is forecast or if frost is imminent.
• Compact the treated  area with a roller or hand Tamper when the surface is no longer adhering to the compaction equipment
• After 24 hours spray the surface of the treated area with the remaining 10 ltrs of BunkerFix
• When the surface is dry replace the bunker sand
• Clean all equipment with water immediately after use.